- 22 Jan, 2015 3 commits
-
-
blogic authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44074 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by:
Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44072 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 21 Jan, 2015 3 commits
-
-
florian authored
The dLAN USB Extender profile was referecing binary packages which are not to be included in any of the source-only feeds. Instead remove these references and document how to use the 3rd party feed. Signed-off-by:
Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44071 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44070 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44069 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 20 Jan, 2015 12 commits
-
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44068 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44067 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44066 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Luigi Tarenga <luigi.tarenga@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44063 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Signed-off-by:
Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44062 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jow authored
Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44060 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44059 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44058 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Ths will allow us to use early 3xx numbers for patches designed for sending mainline. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44057 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This restores normal pre-r43715 200ms blink-period for the System LED we're all accustomed to see while our OpenWrt routers are booting. Failsafe possibility will now be signalled with a new 100ms blinking, which is easily recognizable from the normal 200ms booting. So no existing user will be scared by a new 500ms LED pattern, since such a slow pattern could easily be mistaken for something wrong... I was like "ok why my router is collapsing now, is this a bad flash, a kernel panic, or what else" when I've seen it for the first time ;) Sorry for not having explained myself better in v1 of this patch. Original: Preinit, failsafe is possible: 200ms Preinit, failsafe not possible anymore, booting normally: 200ms Failsafe entered: 50ms Now (after preinit_regular has been introduced): Preinit, failsafe is possible: 200ms Preinit, failsafe not possible anymore, booting normally: 500ms *here is the "offending" change* Failsafe entered: 50ms With my proposed patch: Preinit, failsafe is possible: 100ms *indicate this condition with a new timing, that prompts the user to press the key if they want to start failsafe* Preinit, failsafe not possible anymore, booting normally: 200ms *keep this as before* Failsafe entered: 50ms Signed-off-by:
Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44056 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
this is a mt7621 based board Signed-off-by:
wengbj <linux.c@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44055 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Some Huawei mobile broadband sticks utilizing the NCM protocol expose the control channel as a cdc-wdm device node instead of a virtual TTY. This device node does not support the terminal ioctls. This patch adds a check whether the provided device is a TTY or not and does not attempt to use the terminal ioctls if they are not supported. v2: reduce diffstat by simplifying code a little Signed-off-by:
Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44054 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 19 Jan, 2015 5 commits
-
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44053 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44052 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44051 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Signed-off-by:
Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44050 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44048 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 18 Jan, 2015 17 commits
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44047 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44046 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44045 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44044 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
* use default timeout value * print more debug ring info * move timeout reset function to workqueue Signed-off-by:
michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44043 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44042 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44041 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44040 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44039 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44038 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
luka authored
Signed-off-by:
Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44037 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
luka authored
Signed-off-by:
Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44036 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44035 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44034 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
add a led trigger to ath10k based on the ath9k code Signed-off-by:
Gianluca Anzolin <gianluca@sottospazio.it> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44033 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch builds on the previous three to streamline support for the Netgear DGN3500. Signed-off-by:
Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44032 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
It seems the call to ltq_get_eth_mac() disappeared at some point. This patch puts it where it currently most makes sense. Signed-off-by:
Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44031 3c298f89-4303-0410-b956-a3cf2f4a3e73
-