Commit fa2065e7 authored by blogic's avatar blogic
Browse files

ramips: add support for Tenda 3G150B



Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)
Signed-off-by: default avatarCezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
parent 186163cc
......@@ -24,6 +24,7 @@ case $board in
3g-6200nl)
set_wifi_led "edimax:green:wlan"
;;
3g150b |\
3g300m)
set_usb_led "tenda:blue:3g"
;;
......
......@@ -43,6 +43,7 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "0 6t"
;;
3g150b | \
3g300m | \
w150m | \
all0256n | \
......
......@@ -9,7 +9,7 @@ get_status_led() {
3g-6200n)
status_led="edimax:green:power"
;;
3g300m | w150m)
3g150b | 3g300m | w150m)
status_led="tenda:blue:ap"
;;
ai-br100)
......
......@@ -316,6 +316,9 @@ ramips_board_detect() {
*"Tenda 3G300M")
name="3g300m"
;;
*"Tenda 3G150B")
name="3g150b"
;;
*"Tenda W306R V2.0")
name="w306r-v20"
;;
......
......@@ -16,6 +16,7 @@ platform_check_image() {
case "$board" in
3g-6200n | \
3g-6200nl | \
3g150b | \
3g300m | \
a5-v11 | \
air3gii | \
......
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "3G150B", "ralink,rt5350-soc";
model = "Tenda 3G150B";
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25fl064k";
reg = <0 0>;
linux,modalias = "m25p80", "s25fl064k";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
gpio1: gpio@660 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
esw@10110000 {
ralink,portmap = <0x2f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
ap {
label = "tenda:blue:ap";
gpios = <&gpio0 7 1>;
};
3g {
label = "tenda:blue:3g";
gpios = <&gpio0 14 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 0 1>;
linux,code = <0x198>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
gpios = <&gpio0 13 0>;
};
};
};
......@@ -549,6 +549,8 @@ Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image)
Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
......@@ -676,6 +678,7 @@ ifeq ($(SUBTARGET),rt305x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/3G6200NL,$(1))
$(call Image/Build/Profile/3G150B,$(1))
$(call Image/Build/Profile/3G300M,$(1))
$(call Image/Build/Profile/A5-11,$(1))
$(call Image/Build/Profile/AIR3GII,$(1))
......
......@@ -5,6 +5,19 @@
# See /LICENSE for more information.
#
define Profile/3G150B
NAME:=Tenda 3G150B
PACKAGES:=\
kmod-usb-core kmod-usb-dwc2 \
kmod-ledtrig-usbdev
endef
define Profile/3G150B/Description
Package set for Tenda 3G150B board
endef
$(eval $(call Profile,3G150B))
define Profile/3G300M
NAME:=Tenda 3G300M
PACKAGES:=\
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment